Personal menu

CLOGGER Arcmax Gen3 Arc Rated Stretch FR Men's Chainsaw Trousers

$643.50 Inc. GST

EACH

Availability: Buy In

Brand: Clogger

SKU: C-TU91F

increase decrease

Arc-flashes or accidents involving fire can cause horrific burns or even be fatal.
To protect you against these hazards, Clogger developed the Arcmax line of arc-rated and fully fire resistant chainsaw protective clothing with all components inherently FR including the chainsaw fabric.
Clogger’s Arcmax Gen3 range features the new ultra tough StretchFR outer which gives you 120% 4-way stretch making movement easier.
The Gen3’s are also 60% tougher for an extended life and now have a 11 cal arc rating for more protection. Arcmax just went next level.

Certified by Bureau Veritas NZ Ltd to AS/NZS4453.3:1997 for chainsaw protection, exceeds 20 m/s
Complies with NFPA Code 70E 130.7(11) and ENA NENS 09-2014 for arc protection
Extra leg length to allow for lift while climbing
Outer fabric rated to 11 cal/cm2 according to ASTM F1959 for arc resistance and passed EN ISO 15025: 2000 for fire resistance
All components fire resistant, including outer fabric, chainsaw protective fabric and lining
4-way 120% stretch FR outer for ease of movement with 60% increase in tear strength for extended life
Uses ArrestexFR fire resistant, cut resistant, 6 layer chainsaw protection material which will not melt or burn and is light and cool
50 mm wide FR reflective tape at the lower leg complies with the performance requirements of high visibility standards: ANSI 107:2015; AS/NZS 1906.4:2010
Elasticized waist increases comfort and fit
Opening in bottom hem of both leg for removal of debris
Belt loops to fit a 50 mm belt
Two zipped hip pockets and a zipped pocket on the left thigh for ease of access while wearing a harness
Lock stitched seams and stress points reinforced
Total weight less than 1.1 kg (Medium)

Send us a message

Your name *

Your email *

Enquiry *

Arc-flashes or accidents involving fire can cause horrific burns or even be fatal.
To protect you against these hazards, Clogger developed the Arcmax line of arc-rated and fully fire resistant chainsaw protective clothing with all components inherently FR including the chainsaw fabric.
Clogger’s Arcmax Gen3 range features the new ultra tough StretchFR outer which gives you 120% 4-way stretch making movement easier.
The Gen3’s are also 60% tougher for an extended life and now have a 11 cal arc rating for more protection. Arcmax just went next level.

Certified by Bureau Veritas NZ Ltd to AS/NZS4453.3:1997 for chainsaw protection, exceeds 20 m/s
Complies with NFPA Code 70E 130.7(11) and ENA NENS 09-2014 for arc protection
Extra leg length to allow for lift while climbing
Outer fabric rated to 11 cal/cm2 according to ASTM F1959 for arc resistance and passed EN ISO 15025: 2000 for fire resistance
All components fire resistant, including outer fabric, chainsaw protective fabric and lining
4-way 120% stretch FR outer for ease of movement with 60% increase in tear strength for extended life
Uses ArrestexFR fire resistant, cut resistant, 6 layer chainsaw protection material which will not melt or burn and is light and cool
50 mm wide FR reflective tape at the lower leg complies with the performance requirements of high visibility standards: ANSI 107:2015; AS/NZS 1906.4:2010
Elasticized waist increases comfort and fit
Opening in bottom hem of both leg for removal of debris
Belt loops to fit a 50 mm belt
Two zipped hip pockets and a zipped pocket on the left thigh for ease of access while wearing a harness
Lock stitched seams and stress points reinforced
Total weight less than 1.1 kg (Medium)